4 Channel Load Cell Indicator mAV42010 for Precision Current & Voltage Calibration

4 channel load cell indicator

mAV42010 is a high precision calibrator for sourcing & reading 4 to 20 mA loop current & 0 to 10V voltage.
It is compact, rugged, easy to use , rechargeable battery based hand held device with graphical user interface and touch keys.
It is designed to provide the very high accuracy in all modes.
It has simultaneous source & reading capability with independent parameter and range selection for source and read.
Independent LED indications for each mode.
It has three different modes for Source. E.g. Source, SIM (4 to 20mA) and Voltage source (0 – 10 V).
It has three different modes for READ. E.g. 4 Wire & 2 Wire for 4-20mA, Voltage for 0 – 10V.

Easy to use with touch keys and graphical LCD display. Large font display for easy readings.
Rechargeable lithium ion battery. 15+ hours backup. 4 hours charging time.
Battery capacity indicator.
Simultaneously Read & Source for 4-20mA and 0-10V.
Any value can be easily adjusted by using stepping percentages with percent key. These can be set independently for current and voltage.

General Specification
Display Mode	Precision calibrator 0-10V 4-20mA In/Out 4W/2W/V Source/SIM/V
Max Input Voltage	0-12.5V
Input impedance	mA= 22E U> 1ME
Response time	Input < 100ms Output <100ms
Load impedance	<750Ω Max. for mA >10KΩ for V

Power Supply
Battery Type	Rechargeable lithium ion 7.4V/2600mAh
Charging time	4 Hrs max
Charger Input Output	140-280VAC / 50Hz Output 7.4VDC @1A
Battery Backup time on full charge	>16 hrs Max.
Battery status indication	Battery Symbol Displayed